top of page
Kenwood KFC-XS1704 XS-series Hi-Res Audio Certified 17cm Component Speaker

Kenwood KFC-XS1704 XS-series Hi-Res Audio Certified 17cm Component Speaker

SKU: KWKFCXS1704
$449.00Price
Kenwood XS Series speakers are designed with a mid to higher level of precision then the standard Kenwood speaker.  Kenwood speakers are suitable replacements for your existing car speakers (depending on make and model of vehicle).  What they provide in real terms is the ability to replace your factory speakers with a discreet installation in a flush mount and match to the high resolution audio series of head units.  They are considered a high performance speaker and if set up correctly, they have a wide range high quality sound combined with a tight sound reproduction suitable for customising sound in any vehicle.  They come with a woofer and a tweeter.  

  • FEATURES

    • 17cm 2-way, 4-speaker system.
    • 45W Rated input power (RMS).
    • Golden glass fiber & non-woven woofer cone.
    • Special phase plug with center dip design.
    • AFC and Tornado spider damper.
    • Optimized magnetic circuit with aluminum short ring.
    • Unique 2-way tweeter with swivel application.
    • Outer (hard) and inner (soft) tweeter diaphragm.
    • High-res audio compatible.
    • Attached crossover network.
    • Customised for Toyota and Mitsubishi in the way of brackets and cable connectors.  

  • RICH AND IMMERSIVE HIGH-RESOLUTION AUDIO

    • XS-series ultra-high grade speaker that deliver high density realistic sound and a spatial sound impression. The new 17cm component speaker KFC-XS1704 are precisely designed for High-Resolution Audio by using High Rigid Glass Fiber Diaphragm, Magnietic Circuit with Aluminum Ring and Phase Correcting Diffuser. High-Res Sound is Refined Further with 2-Way Tweeter.This unique 2-way tweeter creates a wide range of sound as each of the 2 tweeters reproduces a different frequency band delivering clarity and fullness.

  • BUILD QUALITY

    • High-Rigid Glass Fiber Diaphragm.  A glass-fiber is the material with high strength and high toughness. The woven glass-fiber diaphragm clearly provides all the detail ans impact you expect.  

    • Optimized Magnetic Circuit with Aluminum Short Ring.  An aluminum ring minimizes unwanted distortion caused by elctromagnetic induction of the voice coil, and it ensures a clear sound.  

    • Aluminum Die-Cast Woofer Frame.  A high-rigidity aluminum frame with high internal loss helps to suppress unwanted vibration, enabling the reproduction of natural, distortion-free sound.  

    • Phase Correction Diffuser
      Its special designed slits correct unwanted phase shift and deliver a more life-like sound experience.

    • Special Center Dip Design
      The concave shape on the center part of the diffuser clearly reproduces a vocal sound image. 

    • 2-Way Tweeter
      Featuring a completely reworked design from magnetic circuitry. The tweeter consists of two tweeters. This unique structure delivers the fulness in a wide range while each tweeter reproduces a different frequency band.

  • CLASSIFICATION

    • 6.5 Inch 3 Way speaker system with Glass Fibre Woofer Cone.  
    • Dual Voice Coil Tweeter  
    • Frequency Response of 34 Hertz to 56 Kilohertz (-10dB).  
    • 180 Watts Peak.  

  • MOUNTING DEPTH

    • 57mm.

  • RATED POWER

    • 45W, 180W Peak.

  • GENERAL SPECIFICATIONS

    • Speaker System    2-way component.
    • Speaker Type    Component.
    • High-Resolution Audio certified    Yes.
    • Peak Input Power    180W.
    • Rated Input Power    45W.
    • Speaker Size    170mm.
    • Speaker Cone Design    Carbon-Glass Fiber Cone.
    • Magnet Type    Ferrit.
    • Terminals    Slide types.
    • Silver plated Terminals    Yes.
    • Swifel Capability    Yes.

  • POWER HANDLING SPECIFICATIONS

    Peak Input Power 180W
    Rated Input Power 45W

     

    RMS Power 180Watts RMS
    Impedance 4Ω
    Sensitivity 83dB/ W at 1 m
    Frequency Response 34Hz ~ 56Hz

  • WOOFER SPECIFICATIONS

    • Peak Input Power    180W.
    • Rated Input Power    45W.
    • Woofer Cone material    Glass Fiber Cone.
    • Woofer cone dimensions    156mm ø.
    • Center Cap Type    Optimized Phase Plug.
    • Speaker Basket    Aluminum Die-Cast.
    • Speaker Surround    Rubber.
    • Spider Type    AFC, Tornado shape.
    • Sensitivity    83dB/W/m.
    • Frequency Response    34Hz ~ 56Hz.
    • Speaker Impedance    4Ω.
    • Dimensions (W x H x D)    156 x 156 x 65.8mm.
    • Mounting Depth    57mm.
    • Mouting Hole Diameter Ø    142mm.
    • Speaker Weight    810g.

  • TWEETER SPECIFICATIONS

    Dimensions 51.7 x 42.6 x 67.5mm
    Cone Material Titanium Hard Dome + Soft dome
    Magnet Type Neodymium
    Speaker Weight 80gr

  • DIMENSION SPECIFICATIONS

    Width 180 mm 7-1/16 inch
    Height 180 mm 7-1/16 inch
    Depth 83.5 mm 3-5/16 inch
    Cut-out Diameter 140 mm 5-1/2 inch
    Height from the mounting surface with Grille 24.5 mm 15/16 inch
    Height from the mounting surface without Grille 21 mm 13/16 inch
    Mounting Depth 59 mm 2-5/16 inch

  • WEIGHT SPECIFICATIONS

    Weight 2700 g

  • ACCESSSORY SPECIFICATIONS

    Bracket for Mitsubishi
    Connection cable for Nissan
    Conection cable for Toyota & Mitsubishi
    Connection tap (4 pcs)
    Speaker cable (2pcs)
    Tweeter Spacer (2 pcs)
    Tweeter bracket (2 pcs)
    Screws (Parker-type) Ø 4 x 16mm, 8 pieces
    Screws (Parker-type) Ø 5 x 20mm, 8 pieces
    Screws (Parker-type) Ø 6 x 20mm, 8 pieces
    Screws (Parker-type) Ø 3 x 12mm, 4 pieces
    Screws (M-type) M5 x 16mm, 8 pieces
    Speed nut φ 3, 4 pieces
    Installation brackets 2 pieces
    Buttyl rubber Yes
bottom of page