top of page
Kenwood KFC-XW800F 8 Inch Shallow Subwoofer 600 W Peak

Kenwood KFC-XW800F 8 Inch Shallow Subwoofer 600 W Peak

SKU: KWXW800F
$249.00Price
The Kenwood Excelon KFC-XW800F 8 Inch subwoofer produces serious bass output in the hard-to-fit areas of your car, truck, or whatever you drive.  
 
The mount is less than 76 Millimetres so you have plenty of options as to where you are going to place this bass.  
 
The carbon-glass fiber cone is  layered in a honeycomb pattern providing a quick sound reproduction response in tight spaces conditions without over flexing.
 
The rubber surround maintains control over the cone, minimizing distortion caused by resonance.
 
A die-cast aluminum basket offers a rock-solid housing with plenty of venting to keep the heat down.
 
The silver-plated push terminals offer convenient connections and provide excellent signal transfer.

  • KEY FEATURES

    • MAX POWER 600W.
    • 8 inch, 203.2 MM Woofer with 4-ohm voice coil.
    • Smooth Linear Rubber Surround.
    • Super Linear Spider.
    • Dual Magnet Drive.
    • Removable Gasket.
    • Screw Lock Terminals.
    • Frequency Response: 40-500 Hz.
    • Sensitivity: 78 dB.
    • Mounting depth: 70mm.

  • SPEAKER FEATURES

    • Speaker Size    300mm.
    • Oversized Dimension    Yes.
    • Speaker Cone Design    Diamond-Array pattern.
    • Magnet Type    Ferrit.
    • Voice-coil    single, multi-layer voice coil.
    • Terminals    Push Type.
    • Spider    Stress controlled spider.
    • Bottom-Yoke    Fully closed bottom yoke.
    • Heat dissipation technology    Airflow control.
    • Installation Capabillity    Sealed / Ported.

  • SPEAKER AND WOOFER SPECIFICATIONS

    • Peak Input Power: 600W
    • Rated Input Power: 150W
    • Impedance: 4 Ohms
    • Sensitivity: 78dB
    • Free-Air Resonance: 43Hz
    • Frequency Response: 40Hz – 500Hz

  • SUBWOOFER PARAMETERS

    Size 250mm 8in
    Diaphragm Carbon-Glass Fiber Honeycom Cone
    Surround Rubber
    Basket Aluminum Die-casting
    Magnet Ferrite φ110*t17

  • HEAT RESISTANT ALUMINIUM VOICE COIL BOBBIN

    • Most common subwoofer failure factor is Voice Coil Burnout. By using heat-resistant aluminum voice-coil bobbin with higher thermal conductivity, heat is easily transferred to the iron parts. This will Increase durability of the voice coil.

  • AIRFLOW CONTROL

    • The air is pushed by the cap, the voice-coil is cooled when air passes through the gap.

  • CLOSED YOKE DESIGN

    • The closed yoke realizes larger magnetic circuit to increase heat radiation, the more metal the better the heat radiation.

  • COMPUTER OPTOMISED SPIDER

    • Redesigned shape to equalize the stress to increase mechanical durability.

  • DIMENSION SPECIFICATIONS

    Width (w/o_Gr) 226.0mm 8-7/8in
    Height (w/o_Gr) 226.0mm 8-7/8in
    Cutout Diameter 186.0mm 7-5/16in
    Depth (w/o_Gr) 90.5mm 3-9/16in
    Mounting Depth 70.0mm 2-3/4in

  • WEIGHT SPECIFICATIONS

    Woofer without Grille (pc.) 2,900g 6.4lbs
    Gross Weight - -
    Weight of Magnet (Woofer) 545g 19.2oz

  • ACCESSSORY SPECIFICATIONS

    ACCESSORY Screw sets
    φ5*30 *8
    Cushion *1
    Badge sets *1

  • MOUNTING DEPTH

    • 70mm.  

  • RATED POWER

    • 150W.

  • CLASSIFICATION

    • 8 Inch Shallow Subwoofer 600W Peak.  
bottom of page