top of page
KENWOOD KFC-PS6976 Performance Series 6 Inch by 9 Inch 3 Way Speakers 550 W Peak

KENWOOD KFC-PS6976 Performance Series 6 Inch by 9 Inch 3 Way Speakers 550 W Peak


Kenwood Performance Series speakers are a suitable replacement for your existing car speakers (depending on make and model of vehicle).  What they provide in real terms is the ability to replace your factory speakers with a discreet installation in a flush mount.  Overall the KENWOOD Performance series speakers are considered easy to install (depending on your level of handypersonness).  As they are considered a higher performance mid range speaker and if set up correctly, they have a wide range high quality sound combined with a tight sound reproduction suitable for customising sound in any vehicle.  


    • 3-Way - 3-Speaker System
    • Diamond Array Pattern, Polypropylene woofer Diaphragm.
    • Urethane Surround.
    • 44mm Midrange.
    • 20mm Tweeter.
    • 550 W Peak Power.
    • Accoustic Sound Harmonizer.
    • Sound Field Enhancer.
    • 4,5m speaker cord included.
    • Grille assembly included.

    • Installed correctly, and paired to the right equipment, the Kenwood PS6976 performance series can deliver an outstanding, quality sounding car audio that rivals a high movie going experience when you are behind the wheel.
    • The speakers themselves feel well built.  Subsequently the speakers are solid and have low distortion.  The speakers are made with a diamond array pattern utilising a polypropylene woofer diaphragm.  The woofer diaphragm is couched or seated in a steel basket and joind to the steel basket with a rubber mount. The woofers produce a rich and full-bodied base and lower mid-range notes. 
    • The low-profile seated tweeter design produces exceptionally clear and vibrant high end sound.

    • The high quality construction of the speakers makes them a good long term solution. 
    • The speakers are constructed in a diamond array pattern with a polypropylene woofer diaphragm.  This is housed in a steel basket joined with a rubber surround.  This combination of materials reproduces sound well if installed correctly.  
    • Capable of handling 130W RMS / 550W Peak power output these car speakers are a fantastic option for lower powered car audio set-ups running purely off the head unit, however, JC Installs recommends you discuss your specific needs further as this can requie an experienced ear to achieve.  
    • The low profile makes installation a breeze in the right hands.
    • The quality of the speakers means they are perfect for replacing factory fitted speakers even in some tight spaces.
    • With the right sound staging technology the reproduction of sound by these speakers will faithfully replicate all of your favourite songs in the way you like by way of tuning. 

    • Performance series 6 inch by 9 Inch 3 way speakers with 550 W peak.  

    • 80.5mm.

    • 550W.

    Screws (Parker-type) Ø 4 x 40mm, 8 pieces
    Washer Ø 4, 8 pieces
    Adhesive tape pad 1 piece(s)
    Grille assembly included Yes
    Speaker cable 4.5m

    Speaker System 3-way 3-speaker System
    Peak Input Power 550W
    Rated Input Power 130W
    Speaker Size 6"x9"
    Speaker Cone Design Diamond-Array pattern
    Magnet Type Ferrit
    Terminals Slide types
    Installation Capabillity Door/Rear Deck

    Woofer Cone material Polypropylene (PP) Cone
    Speaker Basket Steel
    Speaker Surround Urethane
    Sensitivity 88dB/W/m
    Frequency Response 63Hz ~ 22000Hz
    Speaker Impedance 4Ω
    Dimensions with Grill (WxHxD) 266.1 x 197.3 x 108.6mm
    Dimensions w/o Grill (WxHxD) 218.5 x 164 x 92.5mm
    Mounting Depth 80.5mm
    Mouting Hole Diameter 218.5mm x 149.5mm
    Tweeter Height 12mm
    Speaker Weight with Grille (pc.) 1300gr
    Speaker Weight w/o Grille (pc.) 1150gr
    Gross Weight 2600gr
    Weight of Magnet 290gr

    Cone Size 44mm
    Cone Type Balanced Dome
    Magnet Type Ferrite

    Cone Size 20mm
    Cone Material Ceramic
bottom of page