top of page
KENWOOD KFC-PS1096 Performance Series 4 Inch 2 Way Speakers 220 W Peak

KENWOOD KFC-PS1096 Performance Series 4 Inch 2 Way Speakers 220 W Peak


Kenwood Performance Series speakers are a suitable replacement for your existing car speakers (depending on make and model of vehicle).  What they provide in real terms is the ability to replace your factory speakers with a discreet installation in a flush mount.  Overall the KENWOOD Performance series speakers are considered easy to install (depending on your level of handypersonness).  As they are considered a higher performance mid range speaker and if set up correctly, they have a wide range high quality sound combined with a tight sound reproduction suitable for customising sound in any vehicle.  


    • 10cm, 2-Way / 2-Speaker System.
    • Diamond Array Pattern, Polypropylene woofer Diaphragm.
    • Steel basket, rubber surround.
    • 30mm Balanced dome tweeter.
    • 220W Peak Power.
    • Accoustic Sound Harmonizer.
    • Sound Field Enhancer.
    • 0,5m speaker cord included.
    • Grille assembly included.

    • Installed correctly, and paired to the right equipment, the Kenwood KFC-PS1096 performance series can deliver an outstanding, quality sounding car audio that rivals a high movie going experience when you are behind the wheel.
    • The speakers themselves feel well built.  Subsequently the speakers are solid and have low distortion.  The speakers are made with a diamond array pattern utilising a polypropylene woofer diaphragm.  The woofer diaphragm is couched or seated in a steel basket and joind to the steel basket with a rubber mount. The woofers produce a rich and full-bodied base and lower mid-range notes. 
    • The low-profile seated tweeter design produces exceptionally clear and vibrant high end sound.

    • The high quality construction of the speakers makes them a good long term solution. 
    • The speakers are constructed in a diamond array pattern with a polypropylene woofer diaphragm.  This is housed in a steel basket joined with a rubber surround.  This combination of materials reproduces sound well if installed correctly.  
    • Capable of handling 50W RMS / 220W Peak power output these car speakers are a fantastic option for lower powered car audio set-ups running purely off the head unit, however, JC Installs recommends you discuss your specific needs further as this can requie an experienced ear to achieve.  
    • The low profile makes installation a breeze in the right hands.
    • The quality of the speakers means they are perfect for replacing factory fitted speakers even in some tight spaces.
    • With the right sound staging technology the reproduction of sound by these speakers will faithfully replicate all of your favourite songs in the way you like by way of tuning. 

    • Performance series 4 inch 2 way speakers with 220 W peak.  

    • 43.5mm.

    • 50W.

    Screws (Parker-type) Ø 4 x 25mm, 8 pieces
    Speed nut φ 4, 8 pieces
    Adhesive tape pad 1 piece(s)
    Grille assembly included Yes
    Speaker cable 0.5m

    Speaker System 2-way 2-speaker
    Peak Input Power 220W
    Rated Input Power 50W
    Speaker Size 100mm
    Speaker Cone Design Diamond-Array pattern
    Magnet Type Ferrit
    Terminals Slide type
    Installation Capabillity Door/Rear Deck

    Woofer Cone material Polypropylene (PP) Cone
    Speaker Basket Steel
    Speaker Surround Rubber
    Sensitivity 85dB/W/m
    Frequency Response 114Hz ~ 25000Hz
    Speaker Impedance 4Ω
    Dimensions with Grill (WxHxD) 135 x 135 x 58.6mm
    Dimensions w/o Grill (WxHxD) 111 x 111 x 49.4mm
    Mounting Depth 43.3mm
    Mouting Hole Diameter Ø 93.2mm
    Tweeter Height 6mm
    Speaker Weight with Grille (pc.) 527gr
    Speaker Weight w/o Grille (pc.) 480gr
    Gross Weight 1100gr
    Weight of Magnet 160gr

    Cone Size 25mm
    Cone Material Balanced Dome
    Magnet Type Neodymium
bottom of page