top of page
Kenwood KSC-PSW7 7 Inch All In One Subwoofer 160W Peak

Kenwood KSC-PSW7 7 Inch All In One Subwoofer 160W Peak

SKU: KWKSCPSW7
$399.00Price
Technology packed, this active subwoofer from Kenwood is seven inches (7") of pure tight sound.  
With a Mac Power rating of one hundred and sixty watts (160W), a small form factor ((W)280mm x (H)70mm x (D)200mm), a wired remote controller, and a Class D amplifier with Active Equaliser Technology Switch, this unit is perfect fore crusing with the sounds going in the evening.  

  • COMPACT DESIGN

    • Allows for installation almost anywhere, including tight spaces such as under a seat or panel.

  • REMOTE CONTROL SOUND ADJUSTMENT

    • Volume : Input sensitivity control knob.
    • ACTIVE EQ : Equalizer selector switch.
    • Frequency : Cut-off freqeuncy control knob.
    • Phase : Phase select switch.

  • ACTIVE TECHNOLOGY

    • Three types of bass to match the music of various genres equipped with ACTIVE EQ TECHNOLOGY.

  • NEW DIAPHRAGM SPEAKER

    • The KSC-PSW7EQ is equipped with a micro-step shape on the long edge of the diaphragm surrounding the diaphragm.
    • This suppresses the unwanted movement of the diaphragm, which vibrates like a seesaw in the longitudinal direction during operation, thereby supporting accurate vibration and reproducing accurate bass sound to the music.

  • FLEXIBLE CONNECTIVITY AND INSTALLATION

    • Supports speaker level input to connect OEM receiver without RCA outputs.
    • Power turns on from either speaker level or RCA signal.

  • AMPLIFIER SPECIFICATIONS

    • Class D.
    • Maximum Output Power (W)    160W.
    • Signal to Noise Ratio (1ohm at 14.4V)    90dB.
    • Input Impedance    RCA 22k ohm.
    • Speaker 10k ohm.
    • Sensitivity    RCA Voltage 20mV.
    • Speaker Voltage 0.4V.
    • Signal Sensing Turn On(Speaker Level Input).
    • Automatic input swiching (Speaker Level or RCA).
    • Fuse(Battery Cord)    10A.
    • Operating Voltage    DC 14.4V (11V～16V).
    • Maximum Current Consumption    5.9A.

  • WOOFER SPECIFICATIONS

    • Woofer Size    20 x 13cm.
    • Cap　Material    Aluminum.
    • Surround　Material    Urethane.
    • Impedance    1Ω.
    • Frequency Response    40Hz-200Hz(-15dB).
    • Sensitivity    89dB.

  • REMOTE SPECIFICATIONS

    • Gain Control (VOLUME) Variable    -∞ - 0dB.
    • Low-Pass Filter (FREQUENCY)　Variable    50Hz - 125Hz, -18dB/oct.
    • Phase Control (PHASE) Switched    0° - 180°.
    • ACTIVE EQ TECHINOLOGY    
      • HEAVY.
      • TIGHT.
      • FLAT（w/o HEAVY/TIGHT effect mode.).

  • DIMENSION SPECIFICATIONS

    • Width    280mm.
    • Height    70mm.
    • Depth    200mm.

  • WEIGHT SPECIFICATIONS

    • 2.6kg

  • ACCESSSORY SPECIFICATIONS

    • Cables w/ Connector.          
    • Battery Cord    5.0m    18AWG.
    • Battery Fuse    10A.     
    • GND    1.5m    18AWG.
    • RCAInput (Female)    0.7m.     
    • P-CON    5.0m    20AWG.
    • Cables w/ Connector.         
    • Speaker Level Input　(SP) with RCA （Male）    4.3m    18AWG.
    • Remote Controller (Wired)    5.0m.    
    • Mounting Bracket    2pcs. 
    • Cord Crump    1pc.     
    • Screw.          
      • Tapping Screw for Bracket    2pcs    Φ5 x 16mm.
      • Tapping Screw between Under Case and Bracket    2pcs    Φ5 x 12mm.
      • Tapping Screw for Cord Cramp    2pcs    Φ3 x 10mm.
    • Double-faced tape for Wired Remote Controller    1pc.    
    • Warranty Card    1pc.
    • Instruction Manual    4pcs.
bottom of page